Free
Showing all 13 results
This gasket seals the rocker cover to the head on the 4B11 engine. Unlike the earlier 4G63 engines, no other seals are necessary when replacing the rocker cover.
Genuine OEM Mitsubishi replacement cam seals for the Evo 4/5/6/7/8/9 models. Two are required for a full replacement. Price is for one seal.
Gates timing belt kits are engineerd to exact OE fitment and quality Gates manufacture OE timing belts for some of the worlds largest automotive manufacturers Gates timing kits, engine pulleys & tensioners are the trusted choice of automotive garages and mechanics worldwide
Genuine Mitsubishi oil filter to suit both 4G63 and 4B11 powered Evolution models.
This is the only oil filter you will ever need for these engines.
This gasket seals the rocker cover to the head on the 4G63 engine. Evolution 9 models use a different gasket to the previous series.
Replacement spark plug tube seals and PCV gasket are also recommended when changing this gasket.
Replacement for the PCV gasket which is installed into the rocker cover on the 4G63 engine. This gasket often becomes brittle and breaks when removed or disturbed, causing oil leaks.
This gasket seals the rocker cover to the spark plug tubes on the 4G63 engine. If you find oil in your spark plug tubes, this is the part you need to replace.
Evolution 9 models use a different gasket to the previous series.
We recommend replacing these seals along with the PCV gasket when changing the rocker cover gasket.
These cam gears are used to make fine adjustment to valve timing. Installation requires engine tuning to ensure safe operation. Recommended (and often required) when installing aftermarket camshaft upgrades.
Evolution 4-8 models require two cam gears.
Evolution 9 models require only one cam gear due to running the MIVEC system.
We recommend pairing these gears with a set of Kelford Cams 272° camshafts for best results in most applications.
Replacement sensor for 4G63 powered Evolution models. This is the front sensor located in the dump pipe right after the turbo. This sensor does not come with a plug and requires cutting and soldering for installation.
5/77 John St, Welshpool,
Western Australia 6106
Phone: (08) 9358 2729
Email: info@autoworkshop.com.au
